What safety issues need special attention in the operation of the Three roll mill?

1. Equipment inspection and preparation:
Before starting the Three roll mill, the working status and appearance of the equipment must be checked. If any abnormality is found, the maintenance personnel should be notified immediately for maintenance.
Check whether the power supply and wires are normal, without looseness or damage, and ensure the reliability of the power supply grounding to ensure the safety of electrical equipment.
Check whether the cooling water system is operating normally and whether the water flow is unobstructed. If any abnormality is found, the relevant personnel should be notified in time for processing.
Confirm that the lubrication system of the Triple roller grinder is operating normally and the amount of lubricating oil is sufficient. If any abnormality is found, the lubricating oil needs to be added or replaced in time.
2. Operation regulations:
When operating the equipment, the operator should wear complete personal protective equipment, including safety helmets, protective glasses, protective gloves and protective shoes.
Before starting the machine, make sure there are no other people around to prevent accidental injuries.
Before operation, the machine should be turned on according to the equipment manual. After confirming that the equipment is operating normally, the next step can be carried out.
3. Precautions during operation:
Operators must always be alert and must not leave or leave their work stations at will. If you need to leave, you must turn off the equipment and notify other personnel.
During operation, pay close attention to the running status of the grinding material to ensure stable operation of the material.
Operators are prohibited from putting their hands or other objects into the equipment to avoid injury. Keep a safe distance from the moving parts of the equipment.
4. Emergency measures:
If an accident occurs during operation, the machine should be stopped immediately and the person in charge and the first aid personnel should be notified for handling.
If the operator is injured during operation, first aid should be given immediately and the person should be sent to the hospital for treatment in time.
5. Maintenance and cleaning:
Clean and maintain the equipment immediately after use to ensure that the equipment remains clean and in good condition.
Regularly check the wear and accumulation of impurities on the equipment, and take necessary maintenance and cleaning measures in time.
6. Special precautions:
Pay attention to the bearing temperature at both ends of the roller, which generally does not exceed 100°C.
It is strictly forbidden to drive without cooling water.
It is strictly forbidden to enter foreign objects (such as metal blocks, etc.) between the two rollers. If foreign objects are accidentally entered, stop the machine immediately to remove them, otherwise the roller surface or other parts will be damaged.
You should always pay attention to adjusting the front and rear rollers. Due to the linear expansion of the roller, it is easy to swell and die during work, or even brake the motor and cause an accident if you are not careful.