Maintenance of High speed disperser

1. Daily maintenance
Cleaning equipment: After each use, clean the inner and outer surfaces of the disperser, especially the dispersion head and container.
Check fasteners: Check whether the fasteners such as screws and bolts are loose, and tighten them in time.
Lubricating parts: Add lubricating oil to moving parts (such as gears and bearings) to reduce wear.
2. Regular inspection
Check wearing parts: Regularly check the wear of wearing parts such as dispersion heads, seals, bearings, etc., and replace them in time.
Check electrical components: Check whether the wires and cables are loose or damaged, and replace them if necessary.
Check the hydraulic system: If the equipment uses a hydraulic system, it is necessary to regularly check the cleanliness and oil level of the hydraulic oil and replace it if necessary.
3. Long-term outage maintenance
Cleaning equipment: Before long-term outage, thoroughly clean the equipment and wipe it dry.
Oil rust prevention: Apply oil to the spindle and cylinder and other parts to prevent rust.
Cut off the power supply: Make sure the equipment is powered off and stored in a dry and clean environment.
4. Annual maintenance
Full inspection: Perform a full inspection of the equipment, including the electrical system, hydraulic system, mechanical parts, etc.
Replace aging parts: Replace aging or severely worn parts.
Calibrate equipment: Calibrate the speed, pressure and other parameters of the equipment.