Excessive wear of the vertical sand mill will lead to poor grinding effect and increase the cost of disc grinding, so the wear and tear of the equipment should be minimized when using it. The problem of damage to the grinding chamber of the equipment is not to allow users to reduce the number of uses, but to pay attention to a few factors in daily use to avoid damage to the grinder.
1. First start with the size of the vertical sand mill. Proportion. In terms of loading capacity, as the size changes, at the corresponding speed of the ball mill, the greater the mass of the grinding disc, the greater the impact. When setting the size of grinding balls, the collision probability between grinding balls of the same size is high, which is prone to fatigue wear; at the same time, the load of grinding balls will also affect the collision probability between grinding balls.
2. The production efficiency of disc grinder is low. The main factor affecting its production efficiency is that the axial speed is too low and the wear caused by insufficient power is serious. If the distance between the grinding discs is too small, the flow rate will be affected. If this occurs, the spacing should be adjusted as far as possible within the limits.
3. Then the grinding characteristics of the vertical sand mill and the hardness, brittleness, shape and size of the grinding process have a great influence.
What happens to the excessive wear of the vertical sand mill
- May 19, 2023-

