After the vacuum emulsifier is used for a period of time, the temperature of the material in the emulsification kettle may not rise. The reasons are generally as follows:
1. The power supply of the heater of the vacuum emulsifier is out of order.
2. The heat absorption rate of the materials in the stainless steel emulsification kettle is too fast, which is much higher than the outside heating rate, so that the temperature of the materials in the emulsification kettle cannot continue to rise.
3. An important part of the stainless steel emulsification kettle-the heating resistance wire is broken, or the built-in heating plate is damaged, causing the temperature to fail to rise.
4. The heating controller configured by the computer has been damaged, making the user unable to observe the heating process.
www.mixerbeadmill.com