How to properly repair and maintain the kneading machine?

After the initial installation of the kneading machine, the machine should first be cleaned, decontaminated, and wiped with anti-rust grease. Check each lubrication point and inject lubricating oil (grease). Before starting the machine, the tension of the V-belt should be checked, and the kneading machine generator should be moved to the appropriate position by adjusting the bolts. Check whether the fasteners are loose and whether the steam pipe is leaking. The electric heating kneading machine must have a grounding device. Clean the machine room before the test run, run it for a while, and confirm that the kneading machine is operating normally before putting it into production. Usually, the new machine gear (including the reducer) is noisy during the initial use, and the noise will naturally decrease after a period of running-in. Usually, the new machine gear (including the reducer) is noisy during the initial use, and the noise will naturally decrease after a period of running-in.