The horizontal sand mill is a sand mill wet dispersion grinding equipment, which is a common grinding equipment. The sand mill is widely used in coatings, paints, inks, medicine, magnetic powder, ferrite, pesticides, papermaking, cosmetics and other industries.
1. Horizontal mills are mainly divided into horizontal cone mills and horizontal pin mills. When setting up different horizontal mills, the surrounding distance needs to be greater than 1 meter, which is conducive to operation and maintenance and the introduction of water and electricity.
2. When installing the horizontal mill, be sure to pay attention to the direction of the motor. Make sure the motor spins clockwise (stand on the tail of the main body and look in the direction of the barrel). When installing, you can click on the main motor according to the direction of the sign.
3. When installing the whole machine, first open the upper cover of the seat, and pour 10# oil 5 into the seat oil tank about kg.
4. There is no need for positioning anchor screws when installing the whole machine, and it can be installed at any time, but the foundation ground needs to be firm and flat.
5. When installing the whole machine, please pay attention to the power supply. Each user connects the corresponding power line according to the purchased model, and it is recommended to install insurance on each line.
6. When installing the horizontal mill, the operator opens the cooling water pipe, tightens the joint, and adds a stop valve before the total water intake to control the water volume. In addition, experts can connect hoses and pipes according to the respective site situation.
Correct installation method of horizontal sand mill
- May 04, 2023-
