Common faults and troubleshooting methods of mixing machine

1. Poor mixing effect:
Reason: Mixing blades are worn, too much or too little material is added.
Solution: Replace the worn mixing blades and adjust the amount of material added.
2. Excessive vibration or noise of the equipment:
Reason: Unbalanced mixing blades, worn or loose bearings.
Solution: Correct the balance of the mixing blades and replace worn bearings.
3. Electrical system failure:
Reason: Loose or damaged wires and cables, motor failure.
Solution: Check and repair loose or damaged wires, and replace the faulty motor.
4. Mixing machine overheating:
Reason: Long-term operation, overload operation.
Solution: Reasonably set the mixing time to avoid overload operation.